If you ever face a “No internet secured” error on your system, follow these steps to solve it:

  1. Make sure that your internet connection is working properly.
  2. Try to find an online resource that can help you solve the problem.
  3. If the problem persists, contact your internet service provider and ask for help.

Ways to Fix the “No Internet, Secured” Connection Error

Method 1: Reset the Windows 10 Configuration

One of the basic fixes you can try to solve the “No internet secured” issue on your system is to flush the local cache and then reset the network configuration of Windows 10. ..

How to use the internet anonymously on Windows 10/11? To use the internet anonymously on Windows 10/11, you will need to first create an account and then set up a VPN. Once you have done this, you can browse the internet anonymously without fear of being tracked or monitored. To fix exception code 0xc0000005 on Windows 10/11, you will also need to set up a security solution and protect your computer from potential cyber threats.

To reset the configuration, follow these steps:

  1. Open the Settings app on your iPhone or iPad.
  2. Tap General.
  3. Tap Reset All Settings.
  4. Follow the on-screen instructions to complete the reset process. ..

netstat -an |grep tcp netstat -an |grep ip

After entering all the commands mentioned above, reboot the system and check if your internet access is restored or not. If it is not, please contact your ISP to inquire about what could be causing the issue.

Method 2: Disable Your VPN

Your computer is not connected to the internet and you are seeing the error “No internet, secured.” This can be because you have a VPN software turned on on your system or because your computer is not connected to the internet. If this is happening to you, don’t worry, there are ways to fix it. You can try connecting to a working Wi-Fi connection or using a VPN software.

Some VPNs have a built-in security feature that can sometimes block the internet. This is usually seen as a ‘kill-switch’ in most VPNs. ..

Disable or exit the VPN application and reconnect to the Wi-Fi connection may fix this issue. ..

Method 3: Change your Wi-Fi Connection Property

  1. Open the Settings app on your phone.
  2. Scroll down to the Wi-Fi section and select the network you want to change your settings for.
  3. Scroll down to the Wi-Fi properties and select the “Wi-Fi network name” you want to change.
  4. Click on the “change” button and your new Wi-Fi network will be set up!

To fix the Wi-Fi connection error, you can use the “ncpa.cpl” command to see which Wi-Fi connection is causing the error. You can also unplug the cables from the modem and turn off the power to the router if needed.

Is the internet working on your computer or not?

Method 4: Modify the TCP/IP Properties

  1. Open a command prompt and type netstat -an to see the network status.
  2. If the network status says ‘No internet, secured’, then you need to change the TCP/IP settings on your computer so that it is connected to the internet. To do that, follow these steps:
  3. Type netstat -a to list all of the active TCP/IP connections on your computer.
  4. Scroll down to the line that says ‘Internet Protocol Version 6 (TCP/IPv6)’ and change it to ‘TCP/IPv4’.

Now, you can see the “network connections” popup.Right-click on your Wi-Fi connection and select “properties.”Now, click on the TCP/IPv4 or Internet Protocol 4 option.Select the option “obtain an IP address automatically” and the same for the DNS server.Now, when you click on the ‘advanced’ tab, you can find the tab ‘WINS.’At the bottom, select the option “enable NetBIOS over TCP/IP” and hit enter.

Close all the dialog boxes and wait for a few minutes. Now, open the browser and check if the internet is working. ..

Method 5: Reset Winsock

Winsock is a command line tool that helps you to fix the Windows sockets API. This tool is responsible for your PC to interact with the TCP/IP and other network services.

To run the ‘run’ program, first, go to the ‘run’ program by pressing the Windows logo + R button.

netsh winsock reset catalog

Method 6: Disable IPv6

IPv6 is a new network protocol that is more advanced than IPv4. Though IPv4 runs on most of the hardware configurations, sometimes it causes errors.

  1. Open the Control Panel.
  2. Click on Network and Internet.
  3. Under Network and Sharing Center, click on Change adapter settings.
  4. Right-click on the network adapter that you want to disable IPv6 and select Properties.
  5. On the General tab, under IPv6 Settings, uncheck Enable IPv6 and click OK to save your changes. ..

Now, go to the ‘Network and Internet Settings.’Now, click on the ‘change the adaptor options’ and go to ‘Properties.’From the list of the options being displayed, simply untick the option ‘Internet Protocol Version 6 (TCP/IPv6)’ and hit enter.

After completing the above settings, restart your computer. ..

Method 7: Set up a New DNS Server

In some cases, the default DNS server might not work and you might get a ‘No internet, secured’ error. To fix this, you can try to change the DNS server to one that is more reliable.

To fix this issue, you need to set up a new DNS server. Follow the process as given below to do so. ..

In the ‘Internet Protocol Version 4 (TCP/IPv4)’ field, select the option ‘Internet Protocol Version 4 (TCP/IPv4)’ and click on the ‘Properties.’Now, in the DNS server address field, input the following values: Preferred DNS Server: 9.9.9.9Alternative DNS Server: 1.1.1.1

Now press ‘OK’ and apply the settings.

Restart the system and apply the above settings to fix the ‘No internet, secured’ issue.

Method 8: Disable 5Ghz to Fix the Error

A firmware update or any driver update might have caused the laptop to experience a problem with its wireless network connectivity. This problem may be caused by a bug in the laptop’s firmware, or by an incorrect driver installation. If you have a problem with your laptop’s wireless network, please update your firmware and/or drivers.

Disable the 5GHz band to fix this issue. For that, follow these steps:

  1. Go to your router’s admin page and disable the 5GHz band.
  2. Restart your router.
  3. Test your connection and see if the issue is resolved. ..

Now, under the ‘network adapter’ tab, select the ‘wireless network’ you are connected to and click on the ‘properties’ button. In the properties window, you will be able to change the name of your wireless network, set a password and choose whether or not to use a WPA2 security key. Click on the ‘configure’ button to finish setting up your new wireless network.

To disable 802.11n/ac on your computer, open the “Advanced” tab and select “802.11n/ac” from the list. Click “OK” to confirm the change and your computer will automatically connect to 2.4GHz frequencies. ..

Method 9: Change the Power Plan Settings

  1. Open the Start menu and type “netstat”.
  2. Once the netstat window opens, look for the line that says “Internet Protocol Version 6 (IPv6)”. If it is not present, then your computer is in power saving mode and cannot access the internet.
  3. If there is a line that says “Internet Protocol Version 6 (IPv6)”, then your computer is in power saving mode and can access the internet normally. However, if there is no line that says “Internet Protocol Version 6 (IPv6)”, then your computer may be in a power saving mode because it has been unable to find an IP address for itself since Windows 10 was installed on it. To fix this issue, follow these steps: a. Open the Start menu and type “netstat” again. b. Look for the line that says “Internet Protocol Version 4 (IPv4)” instead of “Internet Protocol Version 6 (IPv6)” on the netstat screen. c. If there is a line that says “ Internet Protocol Version 4 (IPv4)”, then your computer can now access the internet normally because it has found an IP address for itself from when Windows 10 was installed on it. If there is no line that says “ Internet Protocol Version 4 (IPv4)”, then your computer may still be in a power saving mode because it has not been able to find an IP address for itself since Windows 10 was installed on it or because you have not enabled IPv4 support in Windows 10 yet! To fix this issue, follow these steps: a. Open the Start menu and type “netstat again” or b>c>d>e>f>g>. h>i>j>.

To save power, open the ‘Power Options’ program and select the ‘Additional Power Settings’. In the ‘Power Saving Mode’ section, set the power saving mode to maximum performance. Click on the ‘Apply’ button and close the popup.

Restart the system and apply these settings to fix the issue.

Method 10: Switch from Wi-Fi to Ethernet

Since this issue is mostly related to Wi-Fi connectivity, make sure to disconnect from the Wi-Fi and switch to a wired connection. ..

If you’re experiencing problems with your internet connection, it’s likely that the issue is with your router or your network drivers. Resetting the configuration of your router may resolve the problem. ..

Method 11: Run Network Troubleshooter

  1. Open the Start menu and type “netstat”.
  2. After the network status is displayed, click on the “show all” button to see all of the network connections in your system.
  3. Scroll down to find the connection that is causing the ‘No internet, secured’ error and right-click on it and select “Properties”.
  4. In the properties window, click on the “Internet Protocol Version 4 (TCP/IPv4)” tab and then click on the “ Properties” button.
  5. In the Internet Protocol Version 4 (TCP/IPv4) properties window, change the value of “Protocols” to “tcpip4_win10_2_0″ and then click on OK to close it.

If you are having problems with your network, you can try the ‘Find and Fix Network Problems’ tool.

If you are experiencing problems with your computer, please try the troubleshooter. ..

In case there are any errors found while troubleshooting, it gets fixed automatically. If not, you need to look for the errors manually and fix them.

Conclusion

Windows users often have to choose between having an internet-less experience or using a more secure configuration. There are multiple ways to fix this issue, but you need to try each one individually. ..